please manually type in AT commands

Router OS v7 setup

  • Open terminal.
  • Type in: 
    interface lte at-chat lte1
  • Input will appear type in: 
    AT+QCFG=”usbnet”,2
  • Reboot the router.

Pre-Router OS v7 setup

DO NOT UPGRADE TO ROUTER OS V7 BEFORE COMPLETING THESE STEPS

  • Open terminal
  • /port firmware set ignore-directip-modem=yes
  • /reboot
  • /port set 0 name=usb1
  • /system serial-terminal port=usb1 channel=2
  • AT+QCFG=”usbnet”,2
  • /port firmware set ignore-directip-modem=no
  • /reboot

You can now upgrade to Router OS v7 upwards.

PPP configuration

NOT RECOMMENDED LIMITS TO 30Mbps Upload/download

Open the Terminal and run the following commands

  • /port firmware set ignore-directip-modem=yes
  • /reboot
  • /port set 0 name=usb1
  • /system serial-terminal port=usb1 channel=2
  • AT+CGDCONT=1,"PPP","telstra.extranet"
  • AT+QCFG="usbnet",0
  • /reboot
  • /interface ppp-client add apn=telstra.extranet data-channel=3 dial-on-demand=no disabled=no info-channel=2 name=ppp-out1 port=usb1
  • /reboot

ADVANCED ADDITIONAL CONFIGURATION

To change/lock to bands, you can do the following:

  • Open terminal
  • interface lte at-chat lte1
  • Band 28: 
    AT+QCFG=“band”,0,8000000,0,1
  • Band 3: 
    AT+QCFG=“band”,0,4444,0,1
  • Unlock and allow all bands bands: 
    AT+QCFG="band",0,7777777,0,1